Over time decks can become grayed and even moldy if left unattended. Using only high pressure to remove this can damage the wood and leave it cracked and splintered.
We use a special “oxygen-activated” solution to loosen the unsightly layer. We let it soak on about 5 boards at a time for about 10 minutes, keeping it wet by adding more solution. We turn the throttle on our pressure washer down low and use a 40-degree wide fan spray tip to make sure we don’t damage the wood.
The unwanted layer is then slowly stripped away leaving behind beautiful wood that looks like new again. Now this wood deck is ready for stain or deck paint to keep it protected for years to come!